反擊式破碎機 Impact Crusher

反擊式破碎機：板錘采用卡塊壓緊裝置，裝卸簡便、運轉可靠；側門加大，板錘、反擊襯板更換更加方便；科學設計撞擊角度，撞擊力大，石料在腔內下行過程中重復多次與板錘、與反擊襯板、與石料之間相互撞擊，從而提高石料的破碎率、降低磨損成本、提高成品產量，所產出的石子似立方體、無張力、無裂縫，符合高速公路、高速鐵路、攪拌站對石子質量的要求。

PF1315、1315/3電機功率220KW，進料粒徑240mm，每小時碎石130-240噸。

PF1315B、1315B/3電機功率250KW，進料粒徑240mm，每小時碎石150-260噸。

PF1214電機功率132KW，進料粒徑200mm，每小時碎石110-180噸。

PF1214B電機功率160KW，進料粒徑200mm，每小時碎石120-200噸。

PF1210電機功率110KW，進料粒徑160mm，每小時碎石80-120噸。

PF1010電機功率75KW，進料粒徑160mm，每小時碎石50-75噸。   

PF1007電機功率55KW，進料粒徑160mm，每小時碎石30-45噸。

　　Impact Crusher(New Type Impact Crusher)：An impact  crusher  is a stone crushing machinery using impact energy to crush  stones . When the impact crusher is working, the rotor driven by the electromotor rotates at a high speed, and the  stones enter  the functioning area of   blow bars  and impact the blow bars mounted on the rotor  and are crushed , and  then thrown onto the impact liners to be crushed again by impact,  and rebounded into the functioning area of  blow bars to be crushed  once more by impact. Such a  process will be repeated for stones to enter the 1st, 2nd and 3rd crushing cavity based on the size range from big to small until the crushed stones are  small enough to escape from the bottom discharging port .  It is possible to change the discharge sizes by adjusting the space between the impact rack and the rotor , or by adjusting the rotating speed of the rotor .
　　The crushed stone product  produced by impact crusher  is of a similarly cubic shape  , free of tension and free of fissures, meeting the requirement of high quality stipulated by expressway , high-speed  rail and cement mixing station  and so on. It is suitable for crushing  stones with  less than medium hardness and with feeding sizes of no more than 300 mm and discharging  sizes of  no more than 50 mm(however, the specific feeding and discharging sizes  should be decided by the  stone hardness and by choosing crusher models .).
　　Our company has optimized the technical parameters of impact crusher . Blow bars on the rotor are assembled with clamping block  devices , easy to be installed  and dismantled ,and safe and reliable to operate. The impact angles are designed scientifically , increasing the impact force . Repeated impact between stones and blow bars , between stones and impact  liners, and rock-on-rock will occur for many times when the stones move down in the crushing cavity, leading to higher crushing rate and higher finished product output, and less abrasion cost . Impact liners are added on the base of the two-chamber type impact crusher for forming the third crushing cavity and increasing impact times . The side door is enlarged,  and it becomes more convenient to replace blow bars and impact liners, or to make examinations  and carry out maintenance inside the  machine  chamber.
　　New Type Impact Crusher : The main shaft  is made of 40Cr steel instead. Dedicated  quality bearings of European  brand are used instead ; an equilibrium feeder is added,  allowing  stones to distribute uniformly in the crushing cavity and improving the utilization of  impacting space inside the crushing cavity. Z type blow bars are adopted for higher utilization  rate  of  blow bars. Movable  square steel is adopted . When  the gap between the blow bar and square steel becomes too big because of  blow  bar  abrasion , the square steel may be moved to avoid too big gap and  stone leakage  , ensuring all stones crushed by impact and the quality of finished  gravels. The new type impact crusher has been awarded national patent .

技術參數Technical  parameters